The instrument is an electronic weighing indicator for the industrial control field. The signal processing adopts high-precision 24-bit dedicated A/D converter, analog signal output selects high-precision D/A converter, with RS232/RS485 serial communication interface, optional MODBUS TCP interface, using small aluminum alloy shell, can be easily embedded in the control cabinet, suitable for cement, chemical, metallurgical and other industries weighing system.

Key features：

※Data update rate: 100 times/second

*Four transistor (OC) outputs enable multiple control modes

*Two switching inputs

※Dual serial port: 1 channel RS485; 1 way RS232 interface

※Three calibration methods, can adapt to a variety of occasions

※Optional 4~20mA or 0~10V interface

※Optional MODBUS TCP interface (C03M)

※Optional Profibus DP interface (C03P)

Technical parameters：           

AD conversion method: ∑-△24bit high-precision A/D conversion,

Indexing values: 1, 2, 5, 10, 20, 50 optional

Input sensitivity: greater than 1.5uV/d,

Sensor excitation voltage: DC 5V

Number of sensor connections: up to 8 350Ω analog sensors,

Input signal range: -20mV~20mV    

Display mode: 6-digit LED digital tube display, word height 0.8 inches   

Communication serial port COM1: RS-232 or RS-485, baud rate: 4800bps ~ 115200bps

Communication serial port COM2: RS-232 baud rate: 4800bps~115200bps

Protocol: Modbus RTU, continuous sending, command mode

Relay mode: upper and lower limit, fixed value output, reduction control, material level control, batching, packaging filling, remote control

Analog output: current: 4mA~20mA;

Voltage: 0V~10V

Overall dimensions (h x w x d): 55×105×66 mm

Cut-out size (h x w): 46×93 mm

Power supply: DC 24V, maximum power consumption 10W